N/A PRE - MASK3020Protective paint

MASK3020Protective paint is a temporary adhesive coating that protects metal, plastic film, polycarbonate, etc. or other impermeable surfaces. Screen printing, roller coating, spraying and other methods can be used, which is easy to separate after drying. characteristic:

The product is composed of polymer polyester, ethylene alcohol filler and other additives, and does not contain unstable compounds and ozone destroying substances. The product is water-soluble, has no ignition point, almost tasteless, and meets the requirements of environmental protection. Application: it can be used to temporarily protect the substrate during printing operation, and also can be used on the finished product before use during transportation or operation.

Operation steps:

This product can be used for screen printing, roll coating or spray. In screen printing, a variety of screens can be used. When the product is not diluted, it can achieve the best effect. If necessary, it can be used20%Dilute with water, dry with air conditioner or oven, and wash with water.
usage method:

Mesh:34T-51TScreen, if the mesh is too fine, it will be difficult to peel off on some substrates. Printing plate: use waterproof and photosensitive materials.
Rubber scraper: the hardness is60-70Degree polyurethane squeegee. Dilution: generally, it does not need to be diluted. If necessary, it can be added20%Dilute with water. Drying: dry in an oven.80-100Celsius drying1-2Minutes, the temperature needs to be increased accordingly

long-term. Cleaning: clean with warm water.

packing:oneGallons andfiveGallons, per gallonMASK3020The weight of protective paint isfour point threekg . Storage conditions:

temperature15-20Celsius, relative temperature55%-65%term of validity:

From the date of productioneighteenMonths.