Transparent conductive ink

Wear resistant transparent conductive varnish is a kind of transparent conductive ink developed by Shenzhen Zhongren behavioral keyboard and dance blanket, which is suitable for screen printing. Can be widely used inEL\Resistance digital touch screenPETIt can be used on the sheet. It has good printability, conductivity, oxidation resistance, hardness, and strong adhesion, and is well matched with carbon paste and insulating ink.

1、 Performance index
one. filler: NickeltwoSolid content（mm%)25 3, density（g/cmthree)one point eight±two

fourViscosity（CPaS)
(rotary viscometer,IICompany,75rpm25°C)

13000-30000 5Coating area（cmtwo/g）(depending on film thickness)three hundred-four hundred

sixSquare resistance（mΩ/□twelveμm
seven. adhesion（3M810Tape, vertical pull) without falling offeight, hardness (Chinese pencil) >3H

nine, flexibility (conductor width1mm，twokg . ×one hundred and eighty，R〈twenty%Valgus × 1 minute × 10 times)

10. Long term operating temperature (° C)

<70

2、 Method of use
1. Substrate PET film
2. Screen printing with 350-400 mesh stainless steel or polyester screenthreeDiluent special diluent diluent, which should be fully stirred before usefourCuring process (recommended)

IRDrying channel:one hundred°C × 10 minute baking:one hundred and ten°C × 15 minutes

fiveStorage room temperature storage, unopened storage period insixMore than monthssixPackagingonekg .

3、 Operation and safety this product contains organic solvents. When using, keep well ventilated to avoid excessive vapor inhalation into the body: for example:

In case of contact with skin, wash it with water and soap in time.

Transparent wear-resistant gloss ink png