JELCON-IN-15m-1System exampleUVInsulating ink

characteristic

one,) has very good insulation (resistance value is withinone trillionAbove)

two,) yesPETGood adhesion of membrane

three,) good bending

four,) good leveling, no bubbles after printing

five,) it has little impact on the silver paste circuit and will not increase the resistance of the silver circuit

six,) excellent printing stability and reproducibility

seven,) little skin irritation

eight、）UVLight curing, reduce working hours

Service conditions

It can be used after being fully stirred before use

Mesh sizeone hundred and fifty—one hundred and eightyorder

Irradiation conditions             Intensity of lamp:120W/square centimetre,oneLight,UVlamp

Transmission speed:six—8M/min

Lamp cooling: air mode  Please use vinylon for cleaning

Note:

   In the unprocessedPETUse on materials

   bin stability

   Please store the ink in a cold and dark place. When it is stored for a long time, the ink will be more stable if it is often stirred and mixed with air. This method of storagesixMonths.